BIOS Password Recovery.

How to Reset / Remove / Bypass

Forgotten BIOS or CMOS Password?

Method 1 of 3: Use the Password Jumper

  1. Break a BIOS Password Step 1.jpg
    1

    Open your computer. This method is for desktop computer users. Unplug the power cord from the back of the computer. Remove the case so that you have access to the motherboard. The motherboard is the main board of the computer, everything is attached to it.

    • Be sure that you ground yourself before touching anything inside your computer, otherwise you might short a component.
      Break a BIOS Password Step 1Bullet1.jpg
    Ad
  2. Break a BIOS Password Step 2.jpg
    2

    Find the BIOS jumper. There are dozens of jumpers on the motherboard, so be sure that you are locating the correct one. Refer to your motherboard’s documentation to double-check. The jumper covers two of the three pins that control the BIOS password.

    • The jumper may be labeled CLEAR CMOS, CLEAR, CLR, JCMOS1, PASSWORD, PSWD, etc.
      Break a BIOS Password Step 2Bullet1.jpg
    • The jumper is typically located on the edge of the motherboard or physically near the CMOS battery.
      Break a BIOS Password Step 2Bullet2.jpg
  3. Break a BIOS Password Step 3.jpg
    3

    Move the jumper. To reset the BIOS password, you will need to move the jumper that is covering two of the three pins. On most systems, moving the jumper over one pin will change it. For example if the jumper is covering pins 1 & 2, move it so that it is covering pins 2 & 3.

    • Some systems will reset the password if the jumper is removed completely.
      Break a BIOS Password Step 3Bullet1.jpg
  4. Break a BIOS Password Step 4.jpg
    4

    Turn the computer on. After booting, the BIOS password should be cleared. Turn the computer back off and replace the jumper to its original position. Replace the case and the computer is ready to be used again.

Method 2 of 3: Use a Backdoor Password

  1. Break a BIOS Password Step 2.jpg
    1

    Determine if you can access your CMOS jumper. Laptop users will typically be unable to access the jumper. If you are using a laptop, you will need to use a backdoor password instead. These passwords are encrypted, but can be decrypted by running special key generating scripts.

  2. Break a BIOS Password Step 6.jpg
    2

    Turn on the laptop. When prompted for the password, guess three times. This will lead to the System Disabled screen. Don’t worry, the system is not actually disabled, it will boot up again when the power is reset.

  3. Break a BIOS Password Step 7.jpg

Take note of the displayed number. You will need this to generate the BIOS backdoor password. The series may contain letters as well as numbers.

Method 2 of 3: Use a Backdoor Password

vijayan

9841983643

send mail

raminfotechadyar@gmail.com

Adyar – Ram Infotech
102, L .B road,
Adyar, Chennai-20.
Landmark: Near Ganapathy Ram Theater

Phone : 044-42116112/3.

http://www.laptopservicecneteradyar.com

2hr : given password free
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s